How To Replace A Sump Pump Float. Bypass and seal the original switch. Lower the newly attached pipe and sump pump into the pit.
The cost of replacing a sump pump discharge pipe is between $175 and $600. Replace the sump pump and test. Bypass and seal the original switch.
Bypass And Seal The Original Switch.
First of all, you need to unplug the old pump and disconnect the discharge line. Bypass and seal the original switch. If a float switch is damaged, it won’t activate the sump pump and may cause water damage to your basement walls or flooring, according to the sump pump info website.
Next, Connect The Float Switch To The Sump Pump.
Allow the sump pump to run until all water has been removed from the sump basin. Follow our guide to learn tips and tricks on how to replace a sump pump float switch on your farm equipment. Sump pump float replacement will require getting the right replacement part.
Bypass The Circuit On The Original Float Switch And Use Silicone Sealant To Thoroughly Seal The Housing.
Loosely attach the replacement switch to the pump housing with a zip tie. The controller has two sensors on long wires that are placed in the sump pit and attach to the discharge pipe with cable ties. Adjust the height of your tether or rod to match the water level in your basin and pump.
Need Help Replacing A Sump Pump Float Switch?
Work on the original float switch; Allow the sump pump to operate till all water has been taken out coming from the sump basin. Make sure that all the parts are properly sealed off, and then place it back into the pit.
Unstick Your Float By Cleaning The Area And Removing And Thing That Is Blocking It From Rising And Falling.
Longer pipes cost more and take longer. Buy several nuts to thread onto the rod that interact with the pump switch. Ensure that the sump pump basin is empty.