How To Light Pilot On Heatilator Gas Fireplace. Gas and wood burning fireplaces have a rating plate in the control compartment area, under the smoke shield or on the firebox. Push the igniter button to identify spark at the pilot area.
How To Light Pilot On Heatilator Gas Fireplace TangeRine from sa13.eatmytangerine.com
Find your heatilator product installation or owner's manual. Gas fireplaces are typically lit using a pilot light that ignites the gas. Locate the gas supply valve;
Depending On How Long It's Been Since The Gas Fireplace Was Last Used, Ignition May Take Multiple Attempts.
Push the igniter button to identify spark at the pilot area. View the step by step guide to safely light the pilot light on your heatilator gas hearth. If the pilot light still won’t stay lit, call the manufacturer or replace the thermocouple.
Make Sure The Module Is Plugged In And Turned On.
How to light the pilot in the heatilator gas fireplace. Gas fireplace operation manual gas fireplace fireplace. Odds are that the pilot.
Pilot Ignition Problems On A Heatilator Gas Fireplace Pilot Ignition Not Sparking.
How to light your pilot light on a gas fireplace | heatilator y22wxfahlchuudri1hqo23ay if it continues to extinguish the flame, replace the vent cap; How do you start a gas fireplace with a lighter? As with all other gas fireplaces, our own gas fireplace isn’t able to burn wood.
Locate The Gas Supply Valve;
Turn on the supply line to the gas fireplace.turn the gas key to release gas to the burner.turn the pilot knob to pilot and push the pilot knob button in. If you have a standing pilot, the gas fireplace will light itself without the need for electricity. To light gas logs safely, turn the control handle to the pilot position, press it in, light the pilot with a match and hold down the handle for half a minute until the pilots are burning on their own.
Each Fireplace And Insert Has A Rating Plate Which Contains Your Model Number And Serial Number.
Heatilator gas fireplaces can be vented through the top or the side. Put control knob to pilot position, press in all the way, and press repeatedly on the ignitor button til pilot lights, hold the pilot knob in for 40sec , then release, if pilot stays on, turn knob to on position, Turn the wall switch on.
