How To Clean A Water Cooler With Hydrogen Peroxide

To Clean A Water Cooler Dispenser, Remove All Filters And Run 35% Food Grade Hydrogen Peroxide Diluted With 11 Times As Much Water Through The Dispenser.

Using a soft sponge, wipe along the top of the water cooler where the water bottle usually rests. Pour 2 ounces of 35% hydrogen peroxide into your mixing container 1. Step 2 fill the jug with about 1 gallon of hot water, 1 tsp.

Dry And Store In A Clean Area.

Clean the water drip tray remove the drip tray cover and remove any excess water with a cloth and clean using either a bleach or vinegar water solution. Start by cleaning the outside of your boat with just water to get it wet and prevent any scratching when you begin brushing. If you can’t wipe up all of the hydrogen peroxide, keep the refrigerator door open and let it evaporate from.

Let The Chlorine Sit In The Water Overnight.

Rinse the container with tap water until the bleach smell is gone. This method should happen in sunny days. When refilling bottles after washing and sanitizing, no drying is necessary.

To Sanitize The Cooler, 25 Ml Of Coolerclean Rinse Is Used = 1.25 Grams H2O2.

Be sure and use 35% food grade product. This corresponds with 0.7 grams of hydrogen peroxide per liter of water (most reservoirs can contain about 1.75 liters of water). This container may be the same as your storage container.

Wipe The Internal Reservoir Components, Baffle Disk And Faucets With A Clean Cloth.

Remove baffle disk by unscrewing it and set aside. Mix in 22 oz of distilled water. Wipe the internal reservoir components, baffle disk and faucets with a clean cloth.